If you would like to contribute, please let me know

Changelog

2010-06-21 – Initial publication, includes DVD Cover banners templates
2010-06-21 – Added Wide banner templates
2010-06-21 – Added link to get ClearART Logos

All Downloads

Series banners

To be completed

Season banners

DVD Cover style

Season Banners must 400 x 578 pixels, and in a jpg format.  To save the PSD as a jpg go to file/Save for Web.

Preview:

Download:

Wide style

Season banners must be 758 x 140 pixels.

Preview:

Download:

Image resources

Eventually ClearART Logos will be available from TheTVDB to use in the images, but until then, your best bet is here http://www.lockstockmods.net/clearart/

Backgrounds can be tricky. Nevertheless, effective when condensed correctly. The syntax for declaring the background shorthand values are as follows:

background properties

element {
background-color: color || #hex || (rgb / % || 0-255);
background-image:url(URI);
background-repeat: repeat || repeat-x || repeat-y || no-repeat;
background-position: X Y || (top||bottom||center) (left||right||center);
background-attachment: scroll || fixed;
}

Believe it or not, all these properties can be combined into one single background property as follows:

the background shorthand property

element {
background:
#fff
url(image.png)
no-repeat
20px 100px
fixed;
}

The Unknown

Often times developers find themselves wondering What if I leave out this value or that one? How will that effect the design?. Good questions.

By default, the background property will assume the following when you do not declare each value of the properties.

default background property values

element {
background-color: transparent;
background-image: none;
background-repeat: repeat;
background-position: top left;
background-attachment: scroll;
}

Lesson learned: be careful on what you don’t declare. By chosing to not declare a value on a shorthand property, you are explicitly declaring the above default settings. For example, let’s look at the following example.

background shorthand example (unexplicit)

element {
background:red url(image.png);
}

This would be the same as declaring the following values:

background shorthand example (explicit)

element {
background:red url(image.png) repeat top left scroll;
}

Font

Font is perhaps the trickiest. However, it follows the same rules as the background shorthand property. All that you do not declare will have unexplicit values. Here is the font shorthand specification:

font properties

element {
font-style: normal || italic || oblique;
font-variant:normal || small-caps;
font-weight: normal || bold || bolder || || lighter || (100-900);
font-size: (number+unit) || (xx-small - xx-large);
line-height: normal || (number+unit);
font-family:name,"more names";
}

The default values for the font shorthand property are as follows:

default font property values

element {
font-style: normal;
font-variant:normal;
font-weight: normal;
font-size: inherit;
line-height: normal;
font-family:inherit;
}

And of course without any further ado. The font shorthand property syntax:

the font shorthand property

element {
font:
normal
normal
normal
inhert/
normal
inherit;
}

Here is where it gets tricky. The fact that font-style, font-variant, and font-weight all come “normal” out of the box, you may need to pay a little more close attention when you’re styling elements that come with default browser styles like <h1> – <h6> or <strong> and <em>. For example, styling the strong element:

strong element styled with font

strong {
font:12px verdana;
}

By writing the above into your style sheet, you will be unexplicitly removing the font-weight:bold default browser style that is applied to strong elements.

Last but not least (for -font- that is), a real world example:

font shorthand property example (unexplicit)

p {
font:bold 1em/1.2em georgia,"times new roman",serif;
}

This would be the same as declaring the following properties:

the font shorthand property (explicit)

p {
font-style:normal;
font-variant:normal;
font-weight:bold;
font-size:1em;
line-height:1.2em;
font-family:georgia,"times new roman",serif;
}

Border

Let’s not waste time discussing the warnings. The same rules apply from here on out. This is all you need to know

border properties

element {
border-width: number+unit;
border-style: (numerous);
border-color: color || #hex || (rgb / % || 0-255);
}

becomes this:

the border shorthand propertie

element {
border:
4px
groove
linen
}

Don’t ask me how that would look. The fact that “linen” is in there, things could get scary. Nevermind the matter, here is where ‘border’ gets funny.

border examples

p {
border:solid blue;
}
/* will create a '3px' solid blue border...
who knows where 3px came from?? */

p {
border:5px solid;
}
/* will create 5px solid 'black' border...
default must be black?? */

p {
border:dashed;
}
/* will create a '3px' dashed 'black' border...
3px black lines unite! */

p { border:10px red; }
p { border:10px; }
p { border:red; }
/* these just don't even work */

One thing to specially take note about declaring a border without a color, the default will be ‘black’ unless otherwise noted through an explicit or inherited ‘color’ property. See the following examples:

border color examples

p {
border:dotted;
color:red;
}
/* will create a 3px dotted red border */
/* ----------------------------- */
body {
color:blue;
}
body p {
border:5px solid;
}
/* will create a 5px solid blue border */
/* ----------------------------- */

Get it? Got it. Good! (isn’t that a song?) Anyway. On with this

Margin and Padding

These are by far the easiest. Just think about the hands of a clock starting at noon, and follow the hour. For the sake of brevity, we’ll be working with margin (since it’s a shorter word). So for all cases of margin, the same rules apply to padding.

margin properties.

element {
margin-top: number+unit;
margin-right: number+unit;
margin-bottom: number+unit;
margin-left: number+unit;
}

… combined into the margin superpowers:

the margin shorthand property

/* top right bottom left */
element {
margin: auto auto auto auto;
}

Of course, you may declare your margin with one, two, three, or four values. Here is how each scenario will be played out:

margin fun

/* adds a 10px margin to all four sides */
element {
margin:10px;
}

/* adds a 20px margin to top and bottom
and a 5px margin to left and right */
element {
margin:20px 5px;
}

/* adds a 50px margin to top
and a 10px margin to left and right
and a 300px margin to bottom */
element {
margin:50px 10px 300px;
}

Understood? Let’s keep going. This is fun isn’t it! (whatever, you like it).

Outline

Quite frankly, this property has dropped off the existence of the design radar. Mainly because of lack of browsers supporting this CSS 2.1 standard (yep, it’s an actual property), but nonetheless, it too has a shorthand property. This property follows the exact same (or same exact – they mean the same thing) specification as the ‘border’ shorthand property. But, for purposes of this being a Guide, it must be here. So:

outline properties

element {
outline-width: number+unit;
outline-style: (numerous);
outline-color: color || #hex || (rgb / % || 0-255);
}

Outline written as shorthand:

outline shorthand property

element {
outline:3px dotted gray;
}

For purposes of trying to keep things from repeating, please see the border shorthand section on this document to understand the odds, ends, and quirks of the outline property.

List-style

This is it. The last one. It’s rarely used frequently. Hence rarely. That is why I kept it until the end (sorry, the best was first in my own opinion). Here is the list-style properties:

list-style properties

element {
list-style-type: (numerous);
list-style-position:inside || outside;
list-style-image:url(image.png);
}

Here is the defaults:

list-style property defaults

element {
list-style-type:disc;
list-style-position:outside;
list-style-image:none;
}

And for the sake of final brevity. Here is a simple example:

list-style shorthand property example

ul li {
list-style:square inside url(image.png);
}
/* in this particular case if image.png is not available
then a square will be provided as secondary */

This guide is originally from http://www.dustindiaz.com/css-shorthand/

SELECT * FROM table
SELECT * FROM table1, table2, ...
SELECT field1, field2, ... FROM table1, table2, ...
SELECT ... FROM ... WHERE condition
SELECT ... FROM ... WHERE condition GROUPBY field
SELECT ... FROM ... WHERE condition GROUPBY field HAVING condition2
SELECT ... FROM ... WHERE condition ORDER BY field1, field2
SELECT ... FROM ... WHERE condition ORDER BY field1, field2 DESC
SELECT ... FROM ... WHERE condition LIMIT 10
SELECT DISTINCT field1 FROM ...
SELECT DISTINCT field1, field2 FROM ...

SELECT ... FROM t1 JOIN t2 ON t1.id1 = t2.id2 WHERE condition
SELECT ... FROM t1 LEFT JOIN t2 ON t1.id1 = t2.id2 WHERE condition
SELECT ... FROM t1 JOIN (t2 JOIN t3 ON ...) ON ...

conditionals:

field1 = value1
field1 <> value1
field1 LIKE 'value _ %'
field1 IS NULL
field1 IS NOT NULL
field1 IS IN (value1, value2)
field1 IS NOT IN (value1, value2)
condition1 AND condition2
condition1 OR condition2

Data Manipulation

INSERT INTO table1 (field1, field2, ...) VALUES (value1, value2, ...)

DELETE FROM table1 / TRUNCATE table1
DELETE FROM table1 WHERE condition
-- join:
DELETE FROM table1, table2 FROM table1, table2 WHERE table1.id1 = table2.id2 AND condition

UPDATE table1 SET field1=new_value1 WHERE condition
-- join:
UPDATE table1, table2 SET field1=new_value1, field2=new_value2, ... WHERE table1.id1 = table2.id2 AND condition

Browsing

SHOW DATABASES
SHOW TABLES
SHOW FIELDS FROM table / DESCRIBE table
SHOW CREATE TABLE table
SHOW PROCESSLIST
KILL process_number

Create / delete database

CREATE DATABASE mabase
CREATE DATABASE mabase CHARACTER SET utf8
DROP DATABASE mabase

ALTER DATABASE mabase CHARACTER SET utf8

Create/delete/modify table

CREATE TABLE table (field1 type1, field2 type2, ...)
CREATE TABLE table (field1 type1, field2 type2, ..., INDEX (field))
CREATE TABLE table (field1 type1, field2 type2, ..., PRIMARY KEY (field1))
CREATE TABLE table (field1 type1, field2 type2, ..., PRIMARY KEY (field1, field2))
CREATE TABLE table1 (fk_field1 type1, field2 type2, ...,
FOREIGN KEY (fk_field1) REFERENCES table2 (t2_fieldA))
[ON UPDATE|ON DELETE] [CASCADE|SET NULL]
CREATE TABLE table1 (fk_field1 type1, fk_field2 type2, ...,
FOREIGN KEY (fk_field1, fk_field2) REFERENCES table2 (t2_fieldA, t2_fieldB))
CREATE TABLE table IF NOT EXISTS (...)

CREATE TEMPORARY TABLE table (...)

DROP TABLE table
DROP TABLE IF EXISTS table
DROP TABLE table1, table2, ...

ALTER TABLE table MODIFY field1 type1
ALTER TABLE table MODIFY field1 type1 NOT NULL ...
ALTER TABLE table CHANGE old_name_field1 new_name_field1 type1
ALTER TABLE table CHANGE old_name_field1 new_name_field1 type1 NOT NULL ...
ALTER TABLE table ALTER field1 SET DEFAULT ...
ALTER TABLE table ALTER field1 DROP DEFAULT
ALTER TABLE table ADD new_name_field1 type1
ALTER TABLE table ADD new_name_field1 type1 FIRST
ALTER TABLE table ADD new_name_field1 type1 AFTER another_field
ALTER TABLE table DROP field1
ALTER TABLE table ADD INDEX (field);

-- Change field order:
ALTER TABLE table MODIFY field1 type1 FIRST
ALTER TABLE table MODIFY field1 type1 AFTER another_field
ALTER TABLE table CHANGE old_name_field1 new_name_field1 type1 FIRST
ALTER TABLE table CHANGE old_name_field1 new_name_field1 type1 AFTER another_field

ALTER TABLE old_name RENAME new_name;

Keys

CREATE TABLE table (..., PRIMARY KEY (field1, field2))
CREATE TABLE table (..., FOREIGN KEY (field1, field2) REFERENCES table2 (t2_field1, t2_field2))

Privileges

GRANT ALL PRIVILEGES ON base.* TO 'user'@'localhost' IDENTIFIED BY 'password';
GRANT SELECT, INSERT, DELETE ON base.* TO 'user'@'localhost' IDENTIFIED BY 'password';
REVOKE ALL PRIVILEGES ON base.* FROM 'user'@'host'; -- one permission only
REVOKE ALL PRIVILEGES, GRANT OPTION FROM 'user'@'host'; -- all permissions

SET PASSWORD = PASSWORD('new_pass')
SET PASSWORD FOR 'user'@'host' = PASSWORD('new_pass')
SET PASSWORD = OLD_PASSWORD('new_pass')

DROP USER 'user'@'host'

Main data types

TINYINT (1o: -217+128) SMALLINT (2o: +-65 000)
MEDIUMINT (3o: +-16 000 000) INT (4o: +- 2 000 000 000)
BIGINT (8o: +-9.10^18)
Precise interval: -(2^(8*N-1)) -> (2^8*N)-1
/!\ INT(2) = "2 digits displayed" -- NOT "number with 2 digits max"

FLOAT(M,D) DOUBLE(M,D) FLOAT(D=0->53)
/!\ 8,3 -> 12345,678 -- NOT 12345678,123!

TIME (HH:MM) YEAR (AAAA) DATE (AAAA-MM-JJ) DATETIME (AAAA-MM-JJ HH:MM; années 1000->9999)
TIMESTAMP (like DATETIME, but 1970->2038, compatible with Unix)

VARCHAR (single-line; explicit size)  TEXT (multi-lines; max size=65535)  BLOB (binary; max size=65535)
Variants for TEXT&BLOB: TINY (max=255) MEDIUM (max=~16000) LONG (max=4Go)
Ex: VARCHAR(32), TINYTEXT, LONGBLOB, MEDIUMTEXT

ENUM ('value1', 'value2', ...) -- (default NULL, or '' if NOT NULL)

Forgot root password?

$ /etc/init.d/mysql stop
$ mysqld_safe --skip-grant-tables
$ mysql # on another terminal
mysql> UPDATE mysql.user SET password=PASSWORD('nouveau') WHERE user='root';
## Kill mysqld_safe from the terminal, using Control + \
$ /etc/init.d/mysql start

Repair tables after unclean shutdown

mysqlcheck --all-databases
mysqlcheck --all-databases --fast